zippy216
02-19-2009, 07:08 AM
I just built a mew system.
ASUS M3A78-T AM2+/AM2 AMD 790GX HDMI ATX AMD Motherboard Thermaltake Purepower W0121RU 600W
AMD Phenom II X4 940 Deneb 3.0GHz Socket AM2+ 125W Quad-Core Black Edition Processor
Rosewill RCX-Z940-LX 92mm Ball CPU Cooler
ATX12V V2.0 SLI Ready CrossFire Ready Power Supply
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory
Western Digital Caviar Green WD10EADS 1TB SATA 3.0Gb/s Hard Drive
ASUS EAH4830/HTDP/512MD3 Radeon HD 4830 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFire Supported Video Card
LG 22X DVD±R DVD Burner Black SATA
LITE-ON Black 4X Blu-Ray DVD Drive SATA
MASSCOOL 5-Port USB2.0 PCI Card
Thermaltake M9 VI1000BWS Black SECC Steel ATX Mid Tower Computer Case
Vista Business 64 bit
I am having a problem at startup. When I power up the system, the system starts to POst and then I get an error message:
*****WARNING SYSTEM BOOT FAILURE***** Your last system boot or POST interrupted. Press F1 to enter setup or press F2 to load default and reboot again. After pressing either, I was able to load Vista with no problem. The problem is that I get this warning everytime I power up the system.
I have looked around on the web but have found no resolution. Any ides?
Thanks
ASUS M3A78-T AM2+/AM2 AMD 790GX HDMI ATX AMD Motherboard Thermaltake Purepower W0121RU 600W
AMD Phenom II X4 940 Deneb 3.0GHz Socket AM2+ 125W Quad-Core Black Edition Processor
Rosewill RCX-Z940-LX 92mm Ball CPU Cooler
ATX12V V2.0 SLI Ready CrossFire Ready Power Supply
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory
Western Digital Caviar Green WD10EADS 1TB SATA 3.0Gb/s Hard Drive
ASUS EAH4830/HTDP/512MD3 Radeon HD 4830 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFire Supported Video Card
LG 22X DVD±R DVD Burner Black SATA
LITE-ON Black 4X Blu-Ray DVD Drive SATA
MASSCOOL 5-Port USB2.0 PCI Card
Thermaltake M9 VI1000BWS Black SECC Steel ATX Mid Tower Computer Case
Vista Business 64 bit
I am having a problem at startup. When I power up the system, the system starts to POst and then I get an error message:
*****WARNING SYSTEM BOOT FAILURE***** Your last system boot or POST interrupted. Press F1 to enter setup or press F2 to load default and reboot again. After pressing either, I was able to load Vista with no problem. The problem is that I get this warning everytime I power up the system.
I have looked around on the web but have found no resolution. Any ides?
Thanks