PDA

View Full Version : USB connect problem



victor35
05-16-2007, 07:27 AM
My Lian-Li case has a mic input, headset input, two USB ports and a FireWire port on the front. When I installed the new main board, I connected these up to it with the wires that were pre-installed in the case, but right now, when I plug my jump drive into either of the USB ports, the jump drive blinks very quick like as if it gets some type of connection but nothing more. Is it possible that I need to find some drivers for these to work or should they work the same as the four ports that are part of the main board?

DemonicDerek
05-20-2007, 11:09 PM
Ok one of two things:

One the flash drive is acoknowledging that you have plugged it in.

or

It is some code saying your flash drive or the USB port is defective.

One thing please check if you can acess your flash drive before saying somethign is wrong.

dadbuilt
07-27-2007, 08:49 AM
Plug in another usb device and see if it works first then after that try the jump drive in another rig and se whats up.