PDA

View Full Version : Antec 900 top panel switches



pb126
04-20-2008, 02:56 PM
Just completed the build of a system with the Antec 900. Seems like the small round button on the left of the top panel is the Power On switch, at least that's what turns the system on once connected to the motherboard. The bigger rectangular one all the way to the right seems to be System Reset. Is this correct or have I somehow inverted it, as I would have guessed the bigger switch is Power On?
Thanks!

RickyTick
04-20-2008, 03:02 PM
You have them reversed. The big one on the right is Power On.

pb126
04-20-2008, 04:30 PM
Thanks. You are correct. Am fixing that. Now, I'm on to the optical drive and HDD. Did you put your HDD in the middle or bottom cage, and if you did choose the bottom cage, did you remove the plastic housing for the optional middle fan, as they suggest in the manual? Thx.

RickyTick
04-20-2008, 05:11 PM
Yes, I used the bottom and removed the plastic housing.

pb126
04-20-2008, 05:44 PM
Any tips on how to remove that middle fan housing most welcome. Can I still do it now that I have the motherboard and graphics card installed? Thx.