ruchirbpatel
01-19-2008, 04:32 PM
hi,
I have following config that i am trying to build:
MOBO: INTEL BOXD975XBX2KR
CPU: INTEL|C2E QX6850 3G 65N 8M
MEMORY: CORSAIR DDR2 XMS2 TWIN2X2048-6400C4 (1GBX4)
HARD Drive: WD RAPOTR 10KRPM
GRAPHIC CARD: EVGA 8800 GT 512MB DDR3
I have tried all steps from first bootup problem page, one thing that is happening for me is that when there is NO graphic card on the board i dont hear any beeps (not sure if it is supposed to or not, cant find anything in manua). I have two GPUs for SLI config that i was planning and i have tried both of them and nothing works. I tried all 3 PCI Express slot and no luck. I see no signal being sent to my monitor and No beeps. I have confirmed that speaker on the board is working by not putting in any memory (it beeped 3 times as expected). I have also tried not attaching my Hard Drive and no beeps there either. CPU was checked 3 times and no damage can be seen. To me either MOBO or CPU. Can anyone see any problem with the parts i am using.
thanks
Ruchir
I have following config that i am trying to build:
MOBO: INTEL BOXD975XBX2KR
CPU: INTEL|C2E QX6850 3G 65N 8M
MEMORY: CORSAIR DDR2 XMS2 TWIN2X2048-6400C4 (1GBX4)
HARD Drive: WD RAPOTR 10KRPM
GRAPHIC CARD: EVGA 8800 GT 512MB DDR3
I have tried all steps from first bootup problem page, one thing that is happening for me is that when there is NO graphic card on the board i dont hear any beeps (not sure if it is supposed to or not, cant find anything in manua). I have two GPUs for SLI config that i was planning and i have tried both of them and nothing works. I tried all 3 PCI Express slot and no luck. I see no signal being sent to my monitor and No beeps. I have confirmed that speaker on the board is working by not putting in any memory (it beeped 3 times as expected). I have also tried not attaching my Hard Drive and no beeps there either. CPU was checked 3 times and no damage can be seen. To me either MOBO or CPU. Can anyone see any problem with the parts i am using.
thanks
Ruchir